Inicio » Crystallography
Category Archives: Crystallography
From today, some interesting entries for readers will be published in English. This first entry will explain the physical reasons because tin whiskers are generated on surfaces of copper or zinz, and methods to prevent this phenomenon.
Whiskers are a small tin wires, growing due to differences in surface tension at the binding surface of the metals, when an electrochemical plating is applied. In 2006, the author and his R&D team had to research this phenomenon. Researchers found the functionality of one product is spoiled along the time. Particularly, when it was stored more than three months. Then, we decided to study this phenomenon, to understand the causes because it produces and find possible solutions to prevent in future developments.
Occurrence of uncontrolled phenomena is important for the Research & Development in any factory. Most of the time, private companies applied more the Development than the Research in their products. However, there are many times where the development has drawbacks and phenomena that are not in the company “know how”. These phenomena enable R&D teams to acquire new knowledge and apply it in the future.
In 2006, my R&D team found a phenomenon affecting the proper operation of one popular product. It was completely unknown to us, but experienced by others: whiskers. It occurred in one important product that we were developing. Because this product was the most important in our catalog, forcing us to do a deeper research, to find a solution, because there were stored material which might be defective. So my R&D team got to work to solve this phenomenon.
Whiskers are a type of mammalian hair, with large size. In Mechanical Engineering, whiskers are tin filaments that grow on a material that has been processing by electroplating. Electroplating is used in the industry, because it serves for fine finishes, easy weldability or protect to corrosion. In our case, electroplating is made with tin and zamak (a zinz, magnesium, aluminum and copper alloy, widely used in industrial housings), to facilitate the weldability on the zamak (it is not weldable), and provide a well-finished product. Therefore, the knowledge of the phenomenon and the possible solutions was very important for us.
TIN WHISKERS ON ZAMAK ALLOY
This phenomenon appeared on Zamak housings, because they must submit a tin plating to weld on the housings, because Zamak does not allow conventional welding.
A drawback happened when, after a large time stored material, this product, a narrow-band amplifier with an 8MHz cavity filter, had a strong deviations in its electrical features. This phenomenon forced to do a new resetting of the filter. In this product, there were two separate settings: first, made during the assembly, and second, 24 hours from the first adjustment. After completing both settings, the cavity filter usually remained stable, but a third setting was recommended if the product was stored over 3 months (storage rotation).
However, along the product development, my R&D team discovered that the cavity filter was not stable and the failure of the selectivity and insertion losses grew along the time. Implying that, despite the third adjustment, could not ensure the filter stability. This failure meant that we could not ensure that the filter was stable in spite of third adjustment.
At first, the phenomenon looked like a failure in the electronic components, caused by a defective lot of capacitors. Then it became a new phenomenon for us: we had accidentally generated whiskers on tin surface.
As I said, whiskers are metal filament-like crystals, which grow on the surface of tin which covers the zamak housing. Crystals are so fine that they are very brittle when the hand is passed over the surface and melt when a short circuit current crosses through them, which it does not have to be very high. In this case, it reduced the cavity volume of the filter, and it changed its resonant frequency, moving the insertion response to higher frequencies.
When we start to study this phenomenon, we discovered that it had been known since the 40’s and even NASA studied deeply the phenomenon, so that part of the way was made: we verified that it was associated with the type of contact surface between the two materials and the thickness applied to the tin plating. Surface tension of the materials and storage temperature were involved, too. In summary, whiskers growth was ruled under the equations of PhD. Irina Boguslavsky and her collaborator Peter Bush:
According to the experimental observations, both equations predicted rather accurately the whiskers growth which was observed in the tin layers. In these equations, σ represents the stress strength, related to the surface tension. LW is related to thickness of the surface bonding and n is a value, dependent on the displacement density and the temperature, T. The k1, k2 and k3 terms are constants which depend on the material properties and RW is the radius of the filament. The h1 and h2 terms refer to the filament growth where it has already happened in the bonding area (h1) and the time at which happens (h2).
In these equations, when LW decreases, h2 increases, because it is an exponential function with n>>1. Therefore, the plating thickness is one of the variables which can be controlled. In our case, this thickness had been decreased from 20μm to 6-8μm because the development incorporated a “F” plug-type, threading, instead of the former 9 ½mm DIN connector. Since the connectors were made in the molding manufacture and they were subsequently threaded, they were made before the tin plating. A 20μm tin plating did not allow that the connectors were threaded.
The σ term is related to the surface tension in the junction and depends only on the materials used. Studying with the plating manufacturer for different thicknesses, we verified that the expressions were consistent, since for larger thicknesses, the growth was always much higher than for smaller thicknesses, and there was always a tendency to grow, although it was lower in 20μm platings. Once the plating was made, the stress forces which were applied by the surface tension of zamak, “pushed” to the tin atoms outwards, to maintain the equilibrium conditions. Opposite to them, the surface tension of tin appeared. With less tin thickness, the forces applied at the contact surface were higher than the opposite forces on the tin surface, and with less tin thickness, internal forces which opposed to the surface forces were weaker, allowing the whisker growth outside.
POSSIBLE SOLUTIONS TO WHISKERS GROWTH
One solution, that was provided from Lucent Technologies, was performing an intermediate nickel plating, between zinz surface and the tin plating.
Researchers from Lucent Tech., after several experiments, found that the growth of whiskers was eliminated significantly, to nearly zero values.
In the graphs, we can see that the growth of bright tin over a copper surface which has a similar performance to the zamak. It grows rapidly after 2 months. The growth slope is very high in bright tin. However, when it is applied an intermediate Ni layer, the growth is practically zero. For the satin tin, the growth slope happens after 4 months, and it shows a slightly lower slope. After applying the Ni layer, the growth is practically zero.
The thickness of the Ni plating could be between 1μm and 2μm, while the thickness of tin plating could be maintained around 8μm. Thus, the defective threading is avoided while the whiskers were removed. However, the process was quite expensive, so this option was discarded.
Therefore, we were confronting another problem: how to eliminate the phenomenon, which implied increasing the thickness of the tin plating on the zamak alloy, but also caused the defective in threading at “F” connector. A molding modification, to provide more material on the connector, was quite expensive and involved a larger modification time, having to include inserts. However, it was right to correct the whiskers.
Another problem was raised with the stored material and the material which was being manufactured. The stored material could not be reprocessed because it had been assembled and could not be plated again. The intermediate solution was to remove the tin crystals by cleaning with compressed air.
About the material in manufacturing process (non-plating pieces), a temporary solution was to replace the tin plating. Silver plating was applied. Silver is weldable and can be applied in very thin layers, keeping the features, but it has the disadvantage that its oxide shows a dirty and stained finish, affecting to the product esthetics.
Finally, in-depth study of the phenomenon laid down that increasing the tin thickness should be standard. Defective in threading should be removed by a tool, to make correctly the threading on the connector, and the mold modification could be made, by modifying the inserts of the threaded connectors, to get a 10-20μm plating which do not fill the threadings.
Tin whiskers is a little-known phenomenon. It happens at the microscopic level and seems to have only been studied by agencies and national research laboratories, with strong budgets and appropriate means for its observation.
In Spain, we have found few laboratories which study it. It happens preferably in the industry, caused by the handling of materials. This job was done by my R&D team, allowing us to acquire enough knowledge to correct and prevent it, as well as to avoid its occurrence again.
However, there are many items about it on the web, which allowed us to know, analyze its causes and possible solutions.
- H. Livingston, “GEB-0002: Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment”; GEIA Engineering Bulletin, GEIA-GEB-0002, 2003
- B. D. Dunn, “Whisker formation on electronic materials”, Circuit World, vol. 2, no. 4, pp.32 -40 1976
- R. Diehl, “Significant characteristics of Tin and Tin-lead contact electrodeposits for electronic connectors”, Metal Finish, pp.37-42 1993
- D. Pinsky and E. Lambert, “Tin whisker risk mitigation for high-reliability systems integrators and designers”, Proc. 5th Int. Conf. Lead Free Electronic Components and Assemblies, 2004
- Chen Xu, Yun Zhang, C. Fan and J. Abys, “Understanding Whisker Phenomenon: Driving Force for Whisker Formation”, Proceedings of IPC/SMEMA Council APEX, 2002
- I. Boguslavsky and P. Bush, “Recrystallization Principles Applied to Whisker Growth in Tin”, Proceedings of IPC/SMEMA Council APEX, 2003